Best blower fan for 3d printers

In this post, we’ve put together a collection of the best blower fan for 3d printers available on the market. Our collection is regularly updated with new models that might interest you. All of the products are selected by our expert reviewers. The list of the top 15 best blower fan for 3d printers is given on this page will absolutely help you to grab the best one. Without wasting any time, let’s start with the list of top 15 product’s reviews right now.

If you don’t want to spend too much time searching high and low for the great blower fan for 3d printers then this top list should be your best bet. it comes with all the basic features that are required in good selling products. This is one of the most popular items, which has an average rating of 4.2 stars after more than 1200+ customer reviews.

Top Fifteen List of Best blower fan for 3d printers is given below

Deciding on what size blower fan for 3d printers is best for you can be a tough choice, but with our help, we will discover the best choices and provide some helpful purchasing advice. In order to do this, we first the best blower fan for 3d printers a look into Amazon’s review section and read through the ratings of their top-rated products so that we may determine what sells well among consumers.

There are many types of blower fan for 3d printers to choose from, so it can be difficult to know which one is right for you. However, we’ve put together a list with our top 15 recommendations! If there’s something specific in mind or just want help deciding between styles then read on below:

SaleBestseller No. 1
WINSINN 50mm 5015 Blower Fan 12V, 3D Printer 24 Volt Fans Blower Turbine Turbo Dual Ball Bearing, Brushless Cooling 50mmx15mm 2PIN (Pack of 4Pcs)
  • ✔️WINSINN 5015 blower fan 24V which micro size and lightweight design, suitable for 3D printer hotend / nozzle or any DIY cooling and narrow place.
  • ✔️High quality Dual Ball Bearings, 5-years Warranty. balance between high air volume and low noise, Suitable for 24 hours / day long-term work, long life: 50,000 Hours.
  • ✔️Rated Voltage: DC 24V, Current: 0.1A, Power: 2.4W,Speed: 5500PRM, Air Pressure: 16.28mmH₂O, Airflow: 3.23CFM, Noise: 40dBA
  • ✔️Connector & Cable length: XH2.54 – 11.8in(300mm), Size: 50mm x 50mm x 15mm
  • ✔️Widely Used: Designed to provide high air volume for small areas which requires cooling or ventilation. Suitable for 3D printer, small squirrel cage, humidifier, aromatherapy and can be used as a replacement fan for any electronic products.
SaleBestseller No. 2
WINSINN 50mm 5015 Blower Fan 12V, 3D Printer 12 Volt Fans Blower Turbine Turbo Hydraulic Bearing, Brushless Cooling 50mmx15mm 2PIN (Pack of 4Pcs)
  • ✔️WINSINN 5015 blower fan 12V which micro size and lightweight design, suitable for 3D printer hotend / nozzle or any DIY cooling and narrow place.
  • ✔️High quality Hydraulic Bearings, 2-years Warranty. Balance price and performance, suitable for daily use, life: 35,000 Hours.
  • ✔️Rated Voltage: DC 12V, Current: 0.15A, Power: 1.8W,Speed: 5500PRM, Air Pressure: 16.28mmH₂O, Airflow: 3.23CFM, Noise: 40dBA
  • ✔️Connector & Cable length: XH2.54 – 11.8in(300mm), Size: 50mm x 50mm x 15mm
  • ✔️Widely Used: Designed to provide high air volume for small areas which requires cooling or ventilation. Suitable for 3D printer, small squirrel cage, humidifier, aromatherapy and can be used as a replacement fan for any electronic products.
Bestseller No. 3
WINSINN 40mm Blower Fan 24V, 3D Printer Micro 24 Volt Fans Blower 4020 Dual Ball Bearing, Brushless Cooling 40mmx20mm 2PIN (Pack of 2Pcs)
  • ✔️WINSINN 40mm blower fan 24V which micro size and lightweight design, suitable for 3D printer extruder / hotend / nozzle or any DIY cooling and narrow place.
  • ✔️High quality Dual Ball Bearings, 5-years Warranty. balance between high air volume and low noise, Suitable for 24 hours / day long-term work, long life: 50,000 Hours.
  • ✔️Rated Voltage: DC 24V, Current: 0.09A, Power: 0.96W, Speed: 6500PRM, Air Pressure: 8.34mmH₂O, Airflow: 3.5CFM, Noise: 33.4dBA
  • ✔️Widely Used: Suitable for ventilation of Small PC Case / Router / Raspberry pi / TV box / VR glasses and any small electronic equipment cooling ventilation.
  • ✔️Packing List: 2 x 40mm Blower Fan - 24v - Dual Ball Bearings, Connector & Cable length: XH2.54 – 11.8in(300mm), Size: 40mm x 40mm x 20mm
Bestseller No. 4
WINSINN 40mm Blower Fan 24V, Ender 3 Fan Upgrade 24 Volt Fans Blower 4010 Dual Ball Bearing, Works with Ender 3 Pro 3X CR-10S (Pack of 2Pcs)
  • ✔️WINSINN 40mm blower fan 24v which perfect for ender 3 fan upgrade. Fit for Ender-3、Ender-3 Pro、Ender-3S、Ender-3 v2、Ender-3 Max、Ender-5、Ender-5s、Ender-5 Pro、 Ender—5 Plus、Ender_6、CR-5 Pro H、CR-X、CR-X Pro、CR-6 SE、CR-6 Max、CR-30 (Installation Position for Nozzle)
  • ✔️High quality Dual Ball Bearings, 5-years Warranty. balance between high air volume and low noise, Suitable for 24 hours / day long-term work, long life: 50,000 Hours.
  • ✔️Rated Voltage: DC 24V, Current: 0.07A, Power: 1.68W, Speed: 5400PRM, Air Pressure: 6.68mmH₂O, Airflow: 1.6CFM, Noise: 31dBA
  • ✔️Widely Used: Suitable for ventilation of Small PC Case / Router / Raspberry pi / TV box / VR glasses and any small electronic equipment cooling ventilation.
  • ✔️Packing List: 2 x 40mm Blower Fan 24v - Dual Ball Bearing & Air Guide Parts, Connector & Cable length: XH2.54 – 11.8in(300mm), Size: 40mm x 40mm x 10mm
Bestseller No. 5
5015 Brushless Cooling Fan 4PCS 3D Printer Blower DC 12V Fans 50x50x15mm Fan for Hotend Extruder Heat Sinks with 2 Pin Terminal and Other Small Appliances Series Repair Replacement(12V 0.18A)
  • ✹✹ Power Connection: 2 Pin-ph2.5; Low noise while cooling the hot end of heatsinks.
  • ✹✹ DC 12V 50mm Blower Cooling Fan Hotend Extruder Turbine Fan for cooling heatsinks on hot ends, prints, or other cooling needs.
  • ✹✹ Easy to cool the filament that is deposited on your print. Cooling your print can make the difference between a beautiful print and a failed print.
  • ✹✹ Size:50*50*15mm(L*D*H), Speed:5700±10%RPM, Noise:25dBA, Bearing: oil, DC 12V, 0.18A.
  • ✹✹ Package Included: 4PCS * 5015 mini fan.(✹✹Note: If you meet the fans did not work, you can swap the red and black wires in the plug got it to work. ✹✹Any questions, you can contact us and we will give you a satisfied solution!).
Bestseller No. 6
Creality Original Ender 3 Extruder Fan 4010 Blower 40MM 40x40x10MM 24V DC Cooler Small Cooling Fan for 3D Printer Ender 3, 3 pro, Ender 5
  • It's 100% Creality Original
  • Use For: Creality Ender-3/Ender-3 pro/Ender-5
  • Operation Voltage: DC 24V
  • 40x40x10MM
Bestseller No. 7
SoundOriginal 24V DC Brushless Blower Cooling Fan 50x50x15mm,for 3D Printer Humidifier Aromatherapy and Other Small Appliances Series Repair Replacement (2pcs 24V)
  • Cooling Blower Fans; DC 24V 0.15A 50mmx15mm Widely used in humidifier, aromatherapy and other small appliances series; small heat radiating communication equipment; military equipment; intelligent industrial control equipment plate cooling heat, high precision medical equipment cooling; pc cpu server cooling dissipation and so on---Repair Replacement (2Pack)
  • Bearing. Pure copper bearing made in Japan. Guaranteed to continuously run 20,000 hours under normal temperature. Speed: 5100 RPM
  • Total Size : 5 x 5 x 1.5cm /2" x 2" x 0.6 " (L*D*H); Outlet Size : 2 x1.5cm/0.8" x 0.6"(L*W) Cable Length : 25cm/9.8"; Mounting Spacing : 5.8cm/2.3";Weight : 26g
  • This fan is made of special and premium materials for the Fugetek FG-637, 647 and FG-857 projectors. It is high temperature resistant and extremely durable.
  • Brushless Fan,DC Blower Fan,Brushless DC Blower Fan,50x50x15mm Sper fan | Speed: 5100 | Total Airflow: 6.5 CFM | Air Pressure: 8.90mmH2O | Total Noise: 36.5 dBA | Bearings: Sale price $11.49 Sleeve Bearing; Sale price $14.99 Dual Ball Bearing.
SaleBestseller No. 8
GDSTIME 24V 30mm Blower Fan 30mm x 30mm x10mm 3D Printer Cooling Replacement Fan
  • 【WIDELY USED】30mm blower fan, Designed for cooling or ventilation of 3d printer, helmet, airsoft goggles, LED Lighting, humidifier, memory modules, etc. or as a replacement fan
  • 【PARAMETER】Square - 30mm L x 30mm W x10mm H | Rated Voltage: 24V DC | Current: 0.06 Amp | Power: 1 Watt | Airflow: 1.75 CFM | Noise: 28.3 dBA | Speed: 9000RPM
  • 【POWER CONNECTION】XH2.54-2Pin fan connector with 150mm (5.91 in) cable (Red + Positive, Black - Negative); Operating Voltage Range: 14 to 26V
  • 【MICRO BLOWERS】 Smaller lightweight, only 0.28 oz, ideal for applications that have limited space; Sleeve Bearing work up to 35,000hrs at 25℃
  • 【PACKAGE LIST】Includes 2 pieces 30x30x10mm 24V dc blower fan and mounting screw set; keep your system cool and extend the life
Bestseller No. 9
Magic&shell 4-Pack DC 12V 3D Printer Cooling Fan 5015 2Pin Brushless Turbo Blower Cooling Fan 50x50x15mm
  • Type: 4pcs 5015 Brushless Turbo Blower Cooling Fan 3D Printer Parts Accessories, with 1m red and black 2 lead wire, easy to install.
  • Size: 50x50x15mm. Air Inlet Size: 31mm. Air Outlet Size: 20x15mm. Rated Voltage: DC 12V. Rated Current: 0.18A. Speed: 6500 +/- 10% RPM. Bearing: Sleeve Bearing. Noise: 25dBA
  • Material: Made of high quality plastic, fine workmanship, environmental protection, safety, harmless.
  • Function: Perfect for cooling hot ends, extruder, prints, and other parts need heat sink on 3D printer.
  • Feature: High precision sleeve bearing, ultra quiet DC blower with high-speed rotation, long life and low noise.
Bestseller No. 10
Dorhea Fan 40x40x10mm 24V Ender 3 4010 40mm Extruder Hot End Cooling Fan and DC 24V Turbo Fan Blower Circle Fan for 3D Printer Parts Ender 3/Ender 3 Pro (2PCS)
  • Rated Voltage: DC 24V, 4010 Fans 40x40x10MM
  • The blower fan is used to dissipate heat from the print platform model, and the axial fan is used to dissipate the nozzle kit
  • This 24V 4010 cooling fan compatible with Ender 3, Ender 3X, Ender 3 Pro
  • 24V turbo circle brushless cooling fan can provide with large air flow,low noise; long span life; good running stability and corrosion resistance
  • Package included: DC 24V Extruder Hot End 4010 Fan and DC 24V Turbo Circle fan

we’ve consulted top experts who have in-and-out knowledge about the blower fan for 3d printers. we choose the top most quality product, which comes with amazing features you’ve never heard of before. we have filtered more than 100+ products to give you the list of winning products.

We’ve compiled this list of the top blower fan for 3d printers on the market by doing extensive research and providing concrete facts and details about each product. Our goal is to provide our readers with the best shopping experience possible. If you have any questions about our reviews or site, please don’t hesitate to get in touch.

If you’re looking for top-quality blower fan for 3d printers to help you with your product, we have the perfect solution for you. We update our list of products regularly so that it features only what matters most and is tailored towards meeting your individual requirements.

Leave a Comment